Online Fault Accomodation Control of Catastrophic System Failures

G.G. Yen and L.-W. Ho

References

  1. [1] J. Gertler, Survey of model-based failure detection and isolationin complex plants, IEEE Control Systems Magazine, 8 (6), 1988, 3–11. doi:10.1109/37.9163
  2. [2] A. Vemuri & M. Polycarpou, Neural-network-based robust fault diagnosis in robotic systems, IEEE Trans. on Neural Networks, 8 (6), 1997, 1410–1420. doi:10.1109/72.641464
  3. [3] T. Parisini & S. Sacone, Fault diagnosis and controller reconfiguration and hybrid approach, Proc. IEEE Int. Symp.Intelligent Control, Gaithersburg, MD, 1998, 163–167. doi:10.1109/ISIC.1998.713654
  4. [4] P. Balle & K. Spreitzer, A multi-model approach for detectionand isolation of sensor and process faults for a heat exchanger,Proc. IEEE Int. Conf. on Fuzzy Systems, Anchorage, AK,1998, 1476–1481. doi:10.1109/FUZZY.1998.686337
  5. [5] C. Hajiyev & F. Caliskan, Fault detection in flight controlsystems based on the generalized variance of the Kalman filterinnovation sequence, Proc. American Control Conf., San Diego,CA, 1999, 109–113.
  6. [6] J. Jiang & Q. Zhao, Reconfigurable control based on imprecisefault identification, Proc. American Control Conf., San Diego,CA, 1999, 114–118.
  7. [7] J. Jiang & Q. Zhao, Fault tolerant control system synthesisusing imprecise fault identification and reconfigurable control,Proc. IEEE Int. Symp. on Intelligent Control, Gaithersburg,MD, 1998, 169–174. doi:10.1109/ISIC.1998.713655
  8. [8] P. Frank, Fault diagnosis in dynamic systems using analyticaland knowledge-based redundancy: A survey and some newresults, Automatica, 26(3), 1990, 459–474. doi:10.1016/0005-1098(90)90018-D
  9. [9] P. Maybeck & R. Stevens, Reconfigurable flight control viamultiple model adaptive control methods, IEEE Trans. onAerospace and Electronic Systems, 27 (3), 1991, 470–480. doi:10.1109/7.81428
  10. [10] Y. Zhang & X. Li, Detection and diagnosis of sensor and actuator failures using IMM estimator, IEEE Trans. on Aerospace and Electronic Systems, 34 (4), 1998, 1293–1313. doi:10.1109/7.722715
  11. [11] Y. Zhang & J. Jiang, An interacting multiple-model basedfault detection, diagnosis and fault-tolerant control approach,Proc. IEEE Conf. on Decision and Control, Phoenix, AZ, 1999, 3593–3598. doi:10.1109/CDC.1999.827910
  12. [12] Z. Gao & P. Antsaklis, Reconfigurable control system anddesign via perfect model following, International Journal ofControl, 56 (4), 1992, 783–798. doi:10.1080/00207179208934343
  13. [13] Z. Gao & P. Antsaklis, Stability of the pseudo-inverse methodfor reconfigurable control systems, International Journal ofControl, 53 (3), 1991, 717–729. doi:10.1080/00207179108953643
  14. [14] H. Rauch, Autonomous control reconfiguration, IEEE ControlSystems Magazine, 15 (6), 1995, 37–48. doi:10.1109/37.476385
  15. [15] M. Bodson & J. Groszkiewicz, Multivariable adaptive algorithms for reconfigurable flight control, IEEE Trans. on Control Systems Technology, 5 (2), 1997, 217–229. doi:10.1109/87.556026
  16. [16] H. Noura, D. Sauter, & D. Theilliol, Fault-tolerant control indynamics systems: Application of a winding machine, IEEEControl Systems Magazine, 20 (1), 2000, 33–49. doi:10.1109/37.823226
  17. [17] D. Sauter, F. Hamelin, & H. Noura, Fault tolerant controlin dynamic systems using convex optimization, Proc. IEEEInt. Symp. on Intelligent Control, Gaithersburg, MD, 1998,187–192. doi:10.1109/ISIC.1998.713658
  18. [18] D. Theilliol, H. Noura, & D. Sauter, Fault-tolerant controlmethod for actuator and component faults, Proc. IEEE Conf.on Decision and Control, Tampa, FL, 1998, 604–609. doi:10.1109/CDC.1998.760745
  19. [19] J. Jiang, Design of reconfigurable control systems using eigenstructure assignment, International Journal of Control, 59 (2),1994, 395–410. doi:10.1080/00207179408923083
  20. [20] M. Polycarpou & A. Helmicki, Automated fault detection andaccommodation: A learning systems approach, IEEE Trans.on Systems, Man, and Cybernetics, 25 (11), 1995, 1447–1458. doi:10.1109/21.467710
  21. [21] M. Polycarpou & A. Vemuri, Learning methodology for failuredetection and accommodation, IEEE Control Systems Magazine, 15 (3), 1995, 16–24. doi:10.1109/37.387613
  22. [22] G. Yen & L. Ho, Fault tolerant control: An intelligent slidingmodel control strategy, Proc. American Control Conf., Chicago,IL, 2000, 4204–4208.
  23. [23] T. Apostol, Mathematical analysis (Menlo Park, CA: Addison-Wesley, 1974).
  24. [24] K. Hornik, M. Stinchombe, & H. White, Multilayer feedforwardnetworks are universal approximators, Neural Networks, 2 (5),1989, 359–366. doi:10.1016/0893-6080(89)90020-8
  25. [25] M. Hagan, H. Demuth, & M. Beale, Neural network design(Boston: PWS Publishing, 1996).
  26. [26] D. Mackey, Bayesian interpolation, Neural Computation, 4 (3),1992, 415–447. doi:10.1162/neco.1992.4.3.415
  27. [27] C. Juang & C. Lin, An online self-constructing neural fuzzyinference network and its applications, IEEE Trans. on FuzzySystems, 6 (1), 1998, 12–32. doi:10.1109/91.660805
  28. [28] K. Narendra & K. Parthasathy, Identification and control ofdynamical systems using neural networks, IEEE Trans. onNeural Networks, 1 (1), 1990, 4–27. doi:10.1109/72.80202
  29. [29] K. Narendra & S. Mukhopadhyay, Adaptive control usingneural networks and approximate models, IEEE Trans. onNeural Networks, 8 (3), 1997, 475–485. doi:10.1109/72.572089
  30. [30] K. Narendra & K. Parthasathy, Gradient methods for theoptimization of dynamical systems containing neural networks,IEEE Trans. on Neural Networks, 2 (2), 1991, 252–262. doi:10.1109/72.80336
  31. [31] F. Beaufays & E. Wan, Relating real-time backpropagation andbackpropagation-through-time: An application of flow graphinterreciprocity, Neural Computation, 6 (2), 1994, 297–305. doi:10.1162/neco.1994.6.2.296
  32. [32] X. Zhang, M. Polycarpou, & T. Parisini, Abrupt and incipient fault isolation of nonlinear uncertailnty systems, Proc. American Contol Conf., Chicago, IL, 2000, 3713-3717.

Important Links:

Go Back