AN ANALYTICAL SOLUTION OF CONTACT MELTING AROUND AN AXISYMMETRIC ELLIPSOID

W. Chen, H. Li, G. Li, Z. Liu, and F. Sun

References

  1. [1] F.S. Birth, Conduction heat flow anomalies over a hot sport ina moving medium, Journal of Geophysical Research, 80, 1975,4825–4827. doi:10.1029/JB080i035p04825
  2. [2] L.S. Tong, Core cooling in a hypothetical loss of coolantaccident estimate of heat transfer in core melt-down, NuclearEngineering Design, 8, 1968, 309–312. doi:10.1016/0029-5493(68)90037-X
  3. [3] M.E. Thompson & J. Szekey, The transient behavior of weldpools with the deformed free surface, International Journal ofHeat Mass Transfer, 32, 1989, 1007–1019. doi:10.1016/0017-9310(89)90003-3
  4. [4] M.A. Pudovcin, A.N. Salamatin, S.A. Fomin, & V.K.Chistyakov, Effect of a thermal drill on hot-point ice boringperformance, Journal of Soviet Mathematics, 43(3), 1988,2496–2505. doi:10.1007/BF01095659
  5. [5] S.A. Logan, Deep self-burial of radioactive waste by rockmelting capsules, Nuclear Technology, 21, 1974, 111–124.
  6. [6] G. Jansen & D.D. Stepnewski, Fast reactor fuel interaction withfloor material after a hypothetical core melt-down, NuclearTechnology, 17, 1973, 85–96.
  7. [7] S.H. Emerman & D.L. Turcotte, Stokes’s problem with melting,International Journal of Heat Mass Transfer, 26(11), 1983,1625–1630.
  8. [8] M.K. Moallemi & R. Viskanta, Melting around a migratingheat source, Journal of Heat Transfer, 107, 1985, 451–459.
  9. [9] M.K. Moallemi & R. Viskanta, Experiments on flow inducedby melting around a migrating heat source, Journal of FluidMechanics, 157, 1985, 35–51. doi:10.1017/S0022112085002294
  10. [10] M.K. Moallemi & R. Viskanta, Analysis of melting arounda moving heat source, International Journal of Heat MassTransfer, 29(8), 1986, 1271–1282. doi:10.1016/0017-9310(86)90160-2
  11. [11] M.K. Moallemi & R. Viskanta, Analysis of close contact meltingheat transfer, International Journal of Heat Mass Transfer,29(6), 1986, 855–867. doi:10.1016/0017-9310(86)90181-X
  12. [12] J.V.C. Vargas, A. Bejan, & A. Dobrovicescu, The melting ofan ice shell on a heated horizontal cylinder, Journal of HeatTransfer, 116, 1994, 702–708.
  13. [13] A. Bejan, Theory of rolling contact heat transfer, Journal ofHeat Transfer, 111, 1989, 257–263.
  14. [14] A. Bejan, The fundamentals of sliding contact melting andfriction, Journal of Heat Transfer, 111, 1989, 13–20.
  15. [15] P.A. Litsek & A. Bejan, Sliding contact melting: the effect ofheat transfer in the solid parts, Journal of Heat Transfer, 112,1990, 808–812.
  16. [16] S.A. Fomin & S.M. Cheng, Optimization of the heating surfaceshape in the contact melting problem, Proc. 3rd Int. Conf.on Inverse Design Concepts and Optimization in EngineeringSciences, Washington, DC, 1991, 23–25.
  17. [17] A.L.M. Morega, A.M. Filip, A. Bejan, & P.A. Tyvand, Meltingaround a shaft rotating in a phase-change material, Interna-tional Journal of Heat Mass Transfer, 36(10), 1993, 2499–2509. doi:10.1016/S0017-9310(05)80189-9
  18. [18] W.Z. Chen, S.M. Cheng, & Z. Luo, An analytical solutionof melting around a moving elliptical heat source, Journal ofThermal Science, 3(1), 1994, 23–27. doi:10.1007/BF02653241
  19. [19] P.A. Tyvand & A. Bejan, The pressure melting of ice due toan embedded cylinder, Journal of Heat Transfer, 114, 1992,532–535.104
  20. [20] M. Oka & V.P. Carey, A unified treatment of the direct contactmelting processes in several geometric cases, InternationalCommunications in Heat Mass Transfer, 23(2), 1996, 187–202. doi:10.1016/0735-1933(96)00005-X
  21. [21] L. Quan, Z. Zhang, & M. Faghri, Experiments of contact melt-ing under vibration within rectangular enclosure, AIAA/ASMEJoint Thermophysics and Heat Transfer Conf., 3, 1998, 23–28.
  22. [22] W.Z. Chen, Q.S. Yang, M.Q. Dai, & S.M. Cheng, Analyticalsolution of the heat transfer process during contact meltingof phase change material inside a horizontal elliptical tube,International Journal of Energy Research, 22(2), 1998, 131–140. doi:10.1002/(SICI)1099-114X(199802)22:2<131::AID-ER345>3.0.CO;2-3
  23. [23] M. Lacroix, Modelling of contact melting inside a heatedcapsule, Proc. IASTED Int. Conf., Innsbruck, Austria, 2000,537–541.
  24. [24] M. Lacroix, Contact melting of phase material inside a heatedparallelepedic capsule, Energy Conversion Management, 42(1),2001, 35–47. doi:10.1016/S0196-8904(00)00047-9
  25. [25] A. Bejan, Contact melting heat transfer and lubrication, Ad-vances in Heat Transfer, 24, 1994, 1–38.
  26. [26] W.Z. Chen, F.R. Sun, & Q.S. Yang, Advance in study ofcontact melting, Progress in Physics, 21(3), 2001, 373–384 (inChinese).
  27. [27] W.Z. Chen, G.H. Li, B. Zhu, & F.R. Sun, Contact meltingwith the finite length driven by temperature difference aroundelliptical cylinder, Acta Energiae Solaris Sinica, 24(3), 2003,321–324 (in Chinese).
  28. [28] W.Z. Chen, F.R. Sun, Q.S. Yang, & S.M. Cheng, Investigationof contact melting of phase change materials, Advance inMechanics, 33(4), 2003, 446–460 (in Chinese).

Important Links:

Go Back