IMPACT OF WETTING ON THE PERFORMANCE OF HV INSULATORS UNDER POLLUTED CONDITIONS

R.P. Singh

References

  1. [1] R. Sundararajan & R.S. Gorur, Dynamic arc modelling ofpollution flashover of insulators under dc voltages, IEEE Trans.on Electrical Insulation, 28 (2), 1993, 209–217. doi:10.1109/14.212246
  2. [2] J.P. Holtzhausen & W.L. Vosloo, The pollution flashover ofac energized post type insulators, IEEE Trans. on Dielectricsand Electrical Insulation, 8 (2), 2001, 191–194. doi:10.1109/94.919925
  3. [3] M.P. Panaget, A. Goldman, & M. Goldman, Ozone in wire-to-plane electrode systems, Proc. IEEE Int. Symp. on ElectricalInsulation, Montreal, June 1996, 428–431.
  4. [4] M.M. Shahin, Ionic reactions in corona discharges of atmospheric gases, Advances in Chemistry Series: Chemical Reactions in Electrical Discharges, 80, January 1969, 48–58.
  5. [5] V.M. Moreno & R.S. Gorur, Effect of long-term corona onnon-ceramic outdoor insulator housing materials, IEEE Trans.on Dielectrics and Electric Insulation, 8 (1), 2001, 117–128. doi:10.1109/94.910434
  6. [6] F.A.M. Rizk, Mathematical models for pollution flashover,Electra, 78, 1981, 71–103.
  7. [7] R.P. Singh & J.N. Sinha, Simulation studies on pollution performance of insulators, Journal of the Institution of Engineers(India), 75, May 1994, 26–34.
  8. [8] W.D. Kingery, Introduction to ceramics, 2nd ed. (New York:John Wiley and Sons).
  9. [9] G. Karady, The effect of fog parameters on the testing ofartificially contaminated insulators in fog conditions, PAS94 (2), 1975, 378–385.
  10. [10] N. Arai, AC fog withstand test on contaminated insulatorsby steam fog, IEEE Trans. on PAS, PAS 101 (11), 1982,4316–4321. doi:10.1109/TPAS.1982.317394
  11. [11] K. Naito et al., A study on the characteristics of various conductive contaminants accumulated on high voltage insulators,IEE Trans. on Power Delivery, 8 (4), 1993, 1842–1850. doi:10.1109/61.248293

Important Links:

Go Back