SYNCHRONIZED TRIGONOMETRIC S-CURVE TRAJECTORY FOR JERK-BOUNDED TIME-OPTIMAL PICK AND PLACE OPERATION

Saravana Perumaal and Natarajan Jawahar

References

  1. [1] K.J. Kyriakopoulos and G.N. Saridis, Minimum jerk path generation, Proc. of IEEE Int. Conf. on Robotics and Automation, Philadelphia, PA, 1988, 364–369.
  2. [2] J. Craig, Introduction to robotics: Mechanics and control, 3rd ed. (Pearson Education, New Delhi: Pearson Prentice-Hall, 2005).
  3. [3] J.W. Jeon, An efficient acceleration for fast motion of industrial robots, Proc. IEEE Int. Conf. on Industrial Electronics, Control and Instrumentation, Part 2, Orlando, FZ, 1995, 1336–1341.
  4. [4] A. Piazzi and A. Visioli, Global minimum-jerk trajectory planning of robot manipulators, IEEE Transactions on Industrial Electronics, 47, 2000, 140–149.
  5. [5] D. Constantinescu and E.A. Croft, Smooth and time-optimal trajectory planning for industrial manipulators along specified paths, Journal of Robotic Systems, 17 (5), 2000, 233–249.
  6. [6] S. Macfarlane and E. Croft, Jerk-bounded manipulator trajectory planning. design for real-time applications, IEEE Transactions on Robotics and Automation, 19, 2003, 42–52.
  7. [7] A. Gasparetto and V. Zanotto, A technique for time-jerk optimal planning of robot trajectories, Robotics and Computer-Integrated Manufacturing, 24, 2008, 415–426.
  8. [8] C.S. Lin, P.R. Chang, and J.Y.S. Luh, Formulation and optimization of cubic polynomial joint trajectories for industrial robots, IEEE Transactions on Automatic Control, 28 (12), 1983, 1066–1073.
  9. [9] S. Chand and K. Doty, Online polynomial trajectories for robot manipulators, The International Journal of Robotic Research, 4, 1985, 38–48.
  10. [10] Y. Chen and A. Desrochers, Structure of minimum-time control law for robotic manipulators with constrained paths, Proc. IEEE Int. Conf. Robotics and Automation, Scottsdale, AZ, 1989, 971–976.
  11. [11] C.H. Wang and J.G. Horng, Constrained minimum-time path planning for robot manipulators via virtual knots of the cubic B-spline functions, IEEE Transactions on Automatic Control, 35, 1990, 573–577.
  12. [12] Y.C. Chen, Solving robot trajectory planning problems with uniform cubic B-splines, Optimal Control Applications & Methods, 12, 1991, 247–262.
  13. [13] B. Cao, I.G. Dodds, and W.G. Irwin, Time-optimal and smooth constrained path planning for robot manipulators, Proc. IEEE Int. Conf. Robotics and Automation, San Diego, CA, 1994, 1853–1858.
  14. [14] E. Jamhour and P.J. André, Planning smooth trajectories along parametric paths, Mathematics and Computers in Simulation, 41, 1996, 615–626.
  15. [15] S.F.P. Saramago and V. Steffen Jr., Optimal trajectory planning of robot manipulators in the presence of moving obstacles, Mechanism and Machine Theory, 35 (8), 2000, 1079–1094.
  16. [16] B.J. Martin and J.E. Bobrow, Minimum effort motions for open chain manipulators with task-dependent end-effector constraints, The International Journal of Robotic Research, 18 (2), 1999, 213–224.
  17. [17] S.F.P. Saramago and V. Steffen Jr., Optimization of the trajectory planning of robot manipulators taking into account the dynamics of the system, Mechanism and Machine Theory, 33 (7), 1998, 883–894.
  18. [18] T. Chettibi, H.E. Lehtihet, M. Haddad, and S. Hanchi, Minimum cost trajectory planning for industrial robots, European Journal of Mechanics-A/Solids, 23, 2004, 703–715.
  19. [19] R. Saravanan, S. Ramabalan, and C. Balamurugan, Evolutionary collision-free optimal trajectory planning for intelligent robots, International Journal on Advanced Manufacturing Technology, 36, 2008, 1234–1251.
  20. [20] J. Bobrow, S. Dobowsky, and J. Gibson, Time-optimal control of robotic manipulators along specified path, The International Journal of Robotic Research, 4 (3), 1985, 3–17.
  21. [21] A. Gasparetto and V. Zanotto, Optimal trajectory planning for industrial robots, Advances in Engineering Software, 41, 2010, 548–556.
  22. [22] S. Ramabalan, R. Saravanan, and C. Balamurugan, Multi-objective dynamic optimal trajectory planning of robot manipulators in the presence of obstacles, International Journal of Advanced Manufacturing Technology, 41(5–6), 2009, 580–594.
  23. [23] M. Boryga and A. Grabos’, Planning of manipulator motion trajectory with higher-degree polynomials use, Mechanism and Machine Theory, 44, 2009, 1400–1419.
  24. [24] D. Simon and C. Isik, A trigonometric trajectory generator for robotic arms, International Journal of Control, 57 (3), 1993, 505–517.
  25. [25] D.M. Tsay and C.F. Lin, Asymmetrical inputs for minimizing residual response, IEEE Int. Conf. on Mechatronics, Taipei, Taiwan, 2005, 235–240.
  26. [26] H.Z. Li, Z.M. Gong, W. Lin, and T. Lippa, Motion profile planning for reduced jerk and vibration residuals, SIMTech Technical Reports, 8 (1), Jan–Mar, 2007, 32–37.
  27. [27] K.D. Nguyen, T.C. Ng, and I.M. Chen, On algorithms for planning S-curve motion profiles, International Journal of Advanced Robotic Systems, 5 (1), 2008, 99–106.
  28. [28] P. Corke, A robotics toolbox for MATLAB, IEEE Robotics & Automation Magazine, 3, 1996, 24–32.

Important Links:

Go Back