INTERNAL FORCES ANALYSIS OF THE ACTIVE OVERCONSTRAINED PARALLEL MANIPULATORS

Yundou Xu, Jiantao Yao, and Yongsheng Zhao

References

  1. [1] J.S. Dai, Z. Huang, and H. Lipkin, Mobility of over constrained parallel mechanisms, ASME Journal of Mechanical Design, 12(8), 2006, 220–229.
  2. [2] F. Firmani and R.P. Podhorodeski, Force-unconstrained poses for a redundantly-actuated planar parallel manipulator, Mechanism and Machine Theory, 39(5), 2004, 459–476.
  3. [3] Y.J. Zhao, F. Gao, W.M. Li, W. Liu, et al., Developmentof a 6-DOF parallel seismic simulator with novel redundantactuation, Mechatronics, 19(3), 2009, 422–427.
  4. [4] W.W. Shang and S. Cong, Dexterity and adaptive controlof planar parallel manipulators with and without redundantactuation, ASME Journal of Computational and NonlinearDynamics, 10(1), 2015, 011002-1-11.
  5. [5] Y. Jiang, T.M. Li, and L.P. Wang, The dynamic modeling,redundant-force optimization, and dynamic performance anal-yses of a parallel kinematic machine with actuation redundancy, Robotica, DOI/10.1017/S0263574714000265, 2014, 1–23.
  6. [6] S.B. Nokleby, R. Fisher, R.P. Podhorodeski, and F. Firmani, Force capabilities of redundantly–actuated parallel manipulators, Mechanism and Machine Theory, 40, 2005, 578–599.
  7. [7] Y.D. Xu, J.T. Yao, and Y.S. Zhao, Inverse dynamics and internal forces of the redundantly actuated parallel manipulators, Mechanism and Machine Theory, 51, 2012, 172–184.
  8. [8] Y.F. Zheng and J.Y.S. Luh, Optimal load distribution for two industrial robots handling a single object, Proc. 1988 IEEE Conf. on Robotics and Automation, Philadelphia, USA, 1988, 344–349.
  9. [9] J.F. Gardner, K. Srinivasan, and K.J. Waldron, A solution for the force distribution problem in redundantly actuated closed kinematic chains, ASME Journal of Dynamic Systems, Measurement, and Control, 112(3), 1990, 523–526.
  10. [10] J.M. Tao and J.Y.S. Luh, Coordination of two redundantmanipulators, Proc. 1989 IEEE Conf. on Robotics andAutomation, Scottsdale, AZ, 1989, 425–430.
  11. [11] M.A. Nahon and J. Angeles, Optimization of dynamic forces in mechanical hands, ASME Journal of Mechanisms, Transmissions, and Automation in Design, 113(2), 1991, 167–173.
  12. [12] M.A. Nahon and J. Angeles, Minimization of power losses in cooperating manipulators, ASME Journal of Dynamic Systems, Measurement, and Control, 114(2), 1992, 213–219.
  13. [13] Y.S. Zhao, J.Y. Ren, and Z. Huang, Dynamic loads coordination for multiple cooperating robot manipulators, Mechanism and Machine Theory, 35(7), 2000, 985–995.
  14. [14] X.C. Gao, S.M. Song, and C.Q. Zheng, A generalized stiffness matrix method for force distribution of robotic systems with indeterminacy, ASME Journal of Mechanical Design, 115(3), 1993, 585–591.
  15. [15] Y.J. Zhao and F. Gao, Dynamic performance comparison of the 8PSS redundant parallel manipulator and its non-redundant counterpart – the 6PSS parallel manipulator, Mechanism and Machine Theory, 44(5), 2009, 991–1008.
  16. [16] J. Wu, J.S. Wang, L.P. Wang, and T.M. Li, Dynamics andcontrol of a planar 3-DOF parallel manipulator with actuation redundancy, Mechanism and Machine Theory, 44(4), 2009, 835–849.
  17. [17] D.R. Kerr, M. Griffis, D.J. Sanger, and J. Duffy, Redundant grasps, redundant manipulators, and their dual relationship, Journal of Robotics System, 9(7), 1992, 973–1000.
  18. [18] X.W. Kong and C.M. Gosselin, Type synthesis of 3-DOFtranslational parallel manipulators based on screw theory,ASME Journal of Mechanical Design, 126(11), 2004, 83–92.
  19. [19] M.A. Adli and H. Hanafusa, Contribution of internal forces to the dynamics of closed chain mechanisms, Robotica, 13(5), 1995, 507–514.
  20. [20] H. Liang, W.Y. Chen, and F.L. Hong, Research on the method of improving accuracy of parallel machine tools, Key Engineering Materials, 407–408, 2009, 85–88.
  21. [21] V.R. Kumar and K.J. Waldron, Force distribution in closed kinematic chains, IEEE Robotics & Automation Magazine, 4(6), 1988, 657–664.
  22. [22] T. Yoshikawa and K. Nagai, Manipulating and grasping forces in manipulation by multifingered hands, Proc. IEEE Conf. on Robotics and Automation, Raleigh, NC, 1987, 1998–2004.
  23. [23] I.D. Walker, R.A. Freeman, and S.I. Marcus, Analysis of motion and internal loading of objects grasped by multiple cooperating manipulators, International Journal of Robotics Research, 10(4), 1991, 396–410.
  24. [24] I.D. Walker, R.A. Freeman, and S.I. Marcus, Internal object loading for multiple cooperating robot manipulators, Proc. 1989 IEEE Conf. on Robotics and Automation, Scottsdale, AZ, 1989, 606–611.

Important Links:

Go Back