412-079
|
Neuro-Fuzzy Model of Flue Gas Oxygen Content
Z. Hímer, V. Wertz, J. Kovács, and U. Kortela (Finland)
|
Abstract
|
|
412-107
|
A New Method for Closed-Loop Identification based on Enforced Oscillations
Ž. Jurić and B. Peruničić (Bosnia, Herzegovina)
|
Abstract
|
|
412-109
|
Continuous-Time Model Identification by using Adaptive Observer -- A Case of Non-Uniform Sampling
K. Ikeda, Y. Mogami, and T. Shimomura (Japan)
|
Abstract
|
|
412-116
|
A Method for Identifying Continuous Delayed Systems using Rectangular-Pulse Testing
S.-H. Hwang and Y.-C. Huang (Taiwan)
|
Abstract
|
|
412-121
|
Identification
and Predictive Control of ARX Model by p Norm Minimization
J. Pekař, J. Štecha, and V. Havlena (Czech Republic)
|
Abstract
|
|
412-161
|
Predicting Threshold Loadability for Weak Buses in Radial Distribution System using SVSI
A. Chaturvedi, R. Ranjan, K. Prasad, and N.C. Sahoo (Malaysia)
|
Abstract
|
|
412-164
|
MIMO Wiener Model Identification using Radial Basis Functions Neural Networks
S.S.A. Ali and H.N.Al-Duwaish (Saudi Arabia)
|
Abstract
|
|
412-189
|
Dynamic Modelling of Technical Processes using Jump Markov Linear Gaussian Models
R. Morales-Menéndez, F.J. Cantú Ortiz, and A.R. Favela Contreras (Mexico)
|
Abstract
|
|
412-224
|
Motion Recovery of Moving Objects under Perspective Stereo Vision
H. Kano, H. Fujioka, X. Chen, and T. Sato (Japan)
|
Abstract
|
|
412-805
|
Barcode Identification using Wavelet based Energy
S. Ezekiel, G. Greenwood, and D. Pazzaglia (USA)
|
Abstract
|
|
412-808
|
Automatic Fault Detection using Wavelet Method
S. Ezekiel, D. Pazzalia, and G. Greenwood (USA)
|
Abstract
|
|
412-032
|
Neuro-Fuzzy based Takagi-Sugeno Modeling of Nonlinear Multivariable Antenna Dynamic System
E.A. Al-Gallaf (Bahrain)
|
Abstract
|
|
412-068
|
LMI
based H
E.A. Al-Gallaf (Bahrain)
|
Abstract
|
|
412-102
|
Limit Cycle Analysis of Nonlinear Sampled-Data Systems by Gain-Phase Margin Approach
B.-F. Wu and J.-W. Perng (Taiwan)
|
Abstract
|
|
412-105
|
Delay-Dependent Control for Time-Delayed T-S Fuzzy Systems
E.T. Jeung, J.H. Kim, H.I. Kim, and H.B. Park (Korea)
|
Abstract
|
|
412-115
|
Equivalent RLC Circuits of the Second-Order Dynamical Systems with PWL Controlled Sources
J. Pospisil, Z. Kolka, J. Brzobohaty, S. Hanus, and T. Dostal (Czech Republic)
|
Abstract
|
|
412-134
|
RF Behavioural Modelling using Multisine Vector Data
D. Schreurs (Belgium)
|
Abstract
|
|
412-138
|
Friction-induced Torsional Vibrations in an Experimental Drill-String System
N. Mihajlović, A.A. van Veggel, N. van de Wouw, and H. Nijmeijer (The Netherlands)
|
Abstract
|
|
412-195
|
Nonlinear Blind Equalization using Transform-Domain CMA and Split FIR Filtering
J.H. Jung, B.S. Kim, and S.W. Nam (Korea)
|
Abstract
|
|
412-213
|
Modelling and Simulation of some Bifurcations of Nonlinear Systems with Additive Noise
H.G. Davies (Canada)
|
Abstract
|
|
412-245
|
Dynamic Tracking and Friction Compensation in a 3R Underactuated Manipulator
V. Mahulkar, P.S. Gandhi, and R.N. Banavar (India)
|
Abstract
|
|
412-066
|
Modeling a Wheeled Mobile Robot for Autonomous Navigation Design
W.-S. Lin, C.-L. Huang, M.-K. Chuang, and G.-C. Liu (Taiwan)
|
Abstract
|
|
412-120
|
A Wind Park Reduced-Order Model using Integral Manifold Theory
M. Sedighizadeh and M. Kalantar (Iran)
|
Abstract
|
|
412-123
|
Modeling and Simulation of Performance Degradation in Fault-Tolerant E-Commerce Servers Operating with Cyclical Failures
D.F. García, J. García, D. González, I. Canga, and C. López (Spain)
|
Abstract
|
|
412-131
|
Collaborative Simulation Modelling for Web-based Control Systems
S.F. Qin and D.K. Wright (UK)
|
Abstract
|
|
412-133
|
Scicos: A Dynamic Systems Modeler and Simulator
R. Nikoukhah (France)
|
Abstract
|
|
412-165
|
Application of Interval Arithmetic Simulation Techniques to Wastewater Treatment Processes
A. Rauh, M. Kletting, H. Aschemann, and E.P. Hofer (Germany)
|
Abstract
|
|
412-232
|
Some Tools for Simplified Modelling for Power Plant Operator Training Simulators
B. Šulc (Czech Republic)
|
Abstract
|
|
412-807
|
Testing Embedded Cores-based System-on-a-Chip (SoC) -- Test Architecture and Implementation
S.R. Das (Canada, USA), M.H. Assaf, E.M. Petriu, L. Jin, C. Jin, D. Biswas (Canada), and M. Sahinogl
|
Abstract
|
|
412-007
|
Modeling Supervisory Control for Flexible Manufacturing System using Visual Object Net++
T. Masood, Riaz-ur-Rehman, and M.H. Sahir (Pakistan)
|
Abstract
|
|
412-009
|
Future Horizons for E-Management of Manufacturing Industry
T. Masood, I. Khan, and J. Akhtar (Pakistan)
|
Abstract
|
|
412-052
|
Emperical Model for Classifying Importance of Automation Changes on Paper Machine Performance
T. Kokko, I. Saarinen, T. Huhtelin, and P. Lautala (Finland)
|
Abstract
|
|
412-126
|
Hybrid Iterative Learning Control of a Flexible Manipulator
M.Z.M. Zain, M.O. Tokhi (UK), Z. Mohamed, and M. Mailah (Malaysia)
|
Abstract
|
|
412-144
|
Kinematic Modelling and Simulation of a Novel Interconnected-Chains PKM
L. Bruzzone, R. Molfino, and M. Zoppi (Italy)
|
Abstract
|
|
412-149
|
Modeling and Control of Product Quality in CNC Machines with Adaptive Fuzzy Petri Nets
M.R. Jahed-Motlagh and Z. Kasirolvalad (Iran)
|
Abstract
|
|
412-152
|
Modeling and Control of Cooperative 3-Wheeled Mobile Robots with Decentralized Passive Velocity Field Control
J.H. Suh, J.W. Lee, and K.S. Lee (Korea)
|
Abstract
|
|
412-178
|
Multimodel Knowledge Base Fault Detection and Isolation System
A.R. Campos (Germany) and R.N. Silva (Portugal)
|
Abstract
|
|
412-188
|
A Mechatronic Industrial Machine, Controlled as a PWL System
J.C. Pineda Castillo, R. Alvarez Vargas, and A. Ramos Aparicio (Mexico)
|
Abstract
|
|
412-196
|
Detection and Tracking Control to Unknown Moving Object Considering Sloshing-Suppression in Pouring Robot
Y. Noda, K. Yano, and K. Terashima (Japan)
|
Abstract
|
|
412-250
|
Corrective and Preventive Maintenance Rates Control in Production Planning of a FMS
L.J. Nkeungoue and J.P. Kenné (Canada)
|
Abstract
|
|
412-119
|
Torque Control of Switched Reluctance Motors using Iterative Learning based Design of Current Waveforms
N.C. Sahoo, R. Ranjan, R. Gobbi (Malaysia), S.K. Panda, J.X. Xu, and Z.H. Liang (Singapore)
|
Abstract
|
|
412-135
|
A Simple Algorithm for the Analysis of Unbalanced Three Phase Radial Distribution System
K. Prasad, A. Chaturvedi, R. Ranjan, and N.C. Sahoo (Malaysia)
|
Abstract
|
|
412-146
|
Field-Weakening Scheme Combined with Saturated Voltage Control Strategy
F. Yusivar (Indonesia) and S. Wakao (Japan)
|
Abstract
|
|
412-158
|
Applying Generalized Predictive Control to a Pumped-Storage Hydroelectric Power Station
G.A. Muñoz Hernández and D.I. Jones (UK)
|
Abstract
|
|
412-173
|
A New Electric Power Forecasting Model for Wind Farms
I.J. Ramírez-Rosado and L.A. Fernández-Jiménez (Spain)
|
Abstract
|
|
412-174
|
Improvement of Residential Distribution Systems Operation via Efficient Electrical End-Uses Appliances
I.J. Ramírez-Rosado and E. Tarancón-Andrés (Spain)
|
Abstract
|
|
412-176
|
DSM Actions and Optimal Design of Residential Power Distribution Systems
I.J. Ramírez-Rosado, E. Tarancón-Andrés, L.A. Fernández-Jiménez, E. Zorzano-Alba, E. Garcí
|
Abstract
|
|
412-183
|
On the Optimization of Industrial Combustion Processes using Infrared Thermography
S. Zipser, A. Gommlich, J. Matthes, H.B. Keller, Ch. Fouda, and R. Schreiner (Germany)
|
Abstract
|
|
412-218
|
Torque Control of Switched Reluctance Motors by a Fuzzy Logic based Hybrid Compensation Scheme
R. Gobbi, N.C. Sahoo, and R. Ranjan (Malaysia)
|
Abstract
|
|
412-237
|
On Controlling a HVDC Scheme Connected with a Synchronous Generator
L. Teppoz, G. Bornard, and G. Besançon (France)
|
Abstract
|
|
412-019
|
NURBS Surface Shaping in a Virtual Reality Environment
A. Liverani and G. Piraccini (Italy)
|
Abstract
|
|
412-081
|
An Intrusion Detection Model based on Immune Agent and Its Gene Evolution
K. Yang, Y. Sai, and X. Wang (PRC)
|
Abstract
|
|
412-139
|
Modelling and Analysis of Asynchronous Circuits and Timing Diagrams using Parametric Timed Automata
C.-L. Chen, T. Lin, and H.-C. Yen (Taiwan)
|
Abstract
|
|
412-147
|
Computational Implementation and Evaluation for the Echo-Avoidance Model of the Precedence Effect
J. Huang, Y. Utsuno, and S. Ding (Japan)
|
Abstract
|
|
412-185
|
Iterated Time Series Prediction with Ensemble Models
J.D. Wichard and M. Ogorzałek (Poland)
|
Abstract
|
|
412-216
|
Prototyping for Selecting People: A Competencies Model
J. Clempner and A. Gutiérrez (Mexico)
|
Abstract
|
|
412-217
|
Interactive-Entities: A Model for the Construction of Collaborative Virtual Reality Worlds over the Internet
R. Menchaca-Mendez, A.F. Gutiérrez Tornés, C. Carreto Arellano, and R. Quintero-Tellez (Mexico)
|
Abstract
|
|
412-225
|
Order Reduction for Circuit Models Obtained via Modified Nodal Analysis
G. Buskes and M. Cantoni (Australia)
|
Abstract
|
|
412-239
|
Verification Method for Modelling Cooperating Processes with Coloured Sequence Diagrams
O. Fengler, W. Fengler, and T. Hummel (Germany)
|
Abstract
|
|
412-804
|
Two Conditions for Modelling Large Bayesian Networks
Seong-Ho Kim and Sung-Ho Kim (Korea)
|
Abstract
|
|
412-077
|
Optimal Design of Pole Assignment Systems for a Discrete-time Plant with Input Noise
W. Kase, J. Hayashi, and T. Nagahara (Japan)
|
Abstract
|
|
412-112
|
Cascade GPC for Superheated Steam Temperature Control
I. Benyó, J. Kovács, Z. Hímer, and U. Kortela (Finland)
|
Abstract
|
|
412-163
|
Advanced Automated Algorithm Generation Software in the Control of a Solar Power Plant
G. Caporaletti (Italy), M.C. Marques, and R.N. Silva (Portugal)
|
Abstract
|
|
412-175
|
Modelling and Robust PID Control of an Irrigation Canal Pool
I. Guenova, X. Litrico, and D. Georges (France)
|
Abstract
|
|
412-181
|
Implementing Mixed Discrete-Continuous Models Into Real-Time Environments
B. Däne and W. Fengler (Germany)
|
Abstract
|
|
412-204
|
Modeling of the Distributed Control for the Elevator
M.-U. Lee, S.-Y. Jung, and G.-H. Choe (Korea)
|
Abstract
|
|
412-229
|
Stick-Slip Friction Compensation for Mechatronic Servo Systems
D.-W. Chung and S.-H. Yang (Korea)
|
Abstract
|
|
412-231
|
Stabilization of Double Inverted Pendulum on a Cart by using Integral-Input-to-State-Stability Concept
S. Afkhami, P.J. Maralani, and M.J. Yazdanpanah (Iran)
|
Abstract
|
|
412-235
|
A Control Process Design for Software Quality by Chaotic-Fractal
K. Zhang and Q.-X. Xiong (PRC)
|
Abstract
|
|
412-238
|
2-D Visual Servoing with Velocity Estimation
M.A. Moreno-Armendariz, W. Yu, A.S. Pozniak, and E. Gómez-Ramírez (Mexico)
|
Abstract
|
|
412-246
|
Analysis and Controller Design of a Distributed Parameters Heating System with Time Delay
M. Sarhan (USA)
|
Abstract
|
|
What are Digital Object Identifers?
This publication covers the following topics: Robust Control, Identification, Genetic Algorithms and Intelligent Systems Control, Estimation, Nonlinear Systems, Simulation, Robotics and Manufacturing, Power and Energy Systems, Adaptive Control, Modelling, Signal and Image Processing, Control, and System and Control Theory.